Featured Posts

Flash Stock Rom On Samsung Galaxy J2 Pro SM-J250F [Firmware & Tool]

- No comments
Here is an easy way to Install Samsung Galaxy J2 Pro SM-J250F Stock ROM using ODIN on your Android device. If you have any bootloop or bricked issue on your Samsung Galaxy J2 Pro SM-J250F, try to fix it by yourself by following this guide.

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Samsung logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Samsung Galaxy J2 Pro SM-J250F is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

Flash Stock Rom On Samsung Galaxy J2 Pro SM-J250F

The following guide will show to fix this issue by flash the new firmware to the Samsung Galaxy J2 Pro SM-J250F with ODIN software. Just read the instructions carefully to get the best result at your phone flashing.

Pre-Requirements :


  1. Your Samsung Device battery should be greater than 40%
  2. Install the Samsung USB drivers or just install the KIES.
  3. Download the ODIN flashing tool.
  4. Download the Samsung Stock Rom according to your Samsung device model.

Download Samsung Galaxy J2 Pro SM-J250F Official Firmware

File Name: J250FDXU1ARA2_J250FOLE1ARA2_XID.zip
Country: Indonesia
ROM Version: 7.1.1 Nougat
Build date: 02 Feb 2018
PDA: J250FDXU1ARA2
CSC: J250FOLE1ARA2
Size: 1,7 GB
Download Link: Via Google Drive

Password: www.bagifirmware.com

Download Samsung Galaxy J2 Pro SM-J250F Flashtool & Drivers

How To Flash Samsung Galaxy J2 Pro SM-J250F Stock Rom

Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.
  • The first step is to extract the ODIN flashing tool that you have downloaded and open the odin.exe file as Run as Administrator. 
    Run Odin
  • Turn on your Samsung device into Downloading mode. You can do so by following steps.
    1. Switch off your device
    2. Press the Power key+ Home key + Volume down key Simultaneously until the warning screen appear.
    3. Now press Volume up key to boot into downloading mode.
      Samsung downloading mode
  • Now Connect your device to Computer using the USB cable. When you connect it the ODIN tool detect your device automatically and show a message Added!!. 
    connect samsung to pc
  • Now navigate to Samsung stock ROM that you have downloaded and unzip the package. In the package, there is the number of files available. Just follow the below steps to select files.
    1. click AP/PDA button and select the .tar.md file (compulsory file)
    2. click on CP/Phone button and select the file with MODEM name
    3. click the CSC button and select the file with CSC file name
    4. click the PIT button and select the .pit file.
    Note: If the package contains only one file which is .tar.md file then leave the other steps.

    load firmware file to odin
  • Now its time to start the installation process so to start it just click on Start button. This process will take some time for installing the Stock ROM on your Samsung device.
    star odin
  • After some time ODIN gives a message regarding your process. If ODIN successfully installs the Stock Rom on your device then it will give you SUCCESS message else give you an ERROR message.
    flash samsung success
  • That it guys you have successfully flash your Samsung Android device. Now your mobile automatically restarts and take some time to boot up for the first time.

Note:

If you encounter a Fail! message instead of PASS! message then it might be problem of ODIN version. So remove battery from device and restart it, restart ODIN with different version and repeat the whole process once again. For more detail view you can see the ODIN logs.
Fixing Bootloop After Installing the Firmware

If your phone is stuck in bootloop then boot your device into stock recovery mode and clear “wipe cache partition”. If know more how to fix bootloop then click here.


This is the complete guide about how to flash stock firmware Samsung Galaxy J2 Pro SM-J250F using odin,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting.

Flash Stock Rom On Vivo V3 Max [Firmware & Tool]

- No comments
Here is an easy way to Install Vivo V3 Max Stock ROM using QFIL on your Android device. If you have any bootloop or bricked issue on your Vivo V3 Max, try to fix it by yourself by following this guide.

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Vivo logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Vivo V3 Max is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

Flash Stock Rom On Vivo V3 Max [Firmware & Tool]

The following guide will show to fix this issue by flash the new firmware to the Vivo V3 Max with QFIL software. Just read the instructions carefully to get the best result at your phone flashing.

Download Stock Rom Vivo V3 MAX PD1503F


File Name: Vivo_V3_Max_PD1503F_EX_A_2.5.11_LA.BR.1.2.1_01210_8x16.0.zip
Size: 3,2 GB
Download Link: Via Google Drive

Download Stock Rom Vivo V3 MAX PD1523F


File Name: Vivo_V3-Max_PD1523F_EX_A_2.8.13_QFIL.zip
Size: 2,0 GB
Download Link: Via Google Drive

File Name: Vivo_V3-Max_PD1523F_EX_A_2.8.12_QFIL.zip
Size: 2,0 GB
Download Link: Via Google Drive

Download Flashtool & USB Driver Vivo V3 MAX

How To Flash Vivo V3 Max Stock Rom:

Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

  • Download Stock Firmware Vivo V3 Max and extract zip or rar file in your PC.
  • Download and install Vivo V3 Max USB Driver. While installing driver avoid using cable for successful installation.
  • After installation, connect Phone to PC using USB cable.
  • While connecting to PC, phone should be switched off and press volume up & down as boot key.
  • If it Create Qualcomm  HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
  • Download the QFIL tool.
  • Run QFIL tool.
    Open Qfil
  • Click on Browse under the Programmer path to select MBN File.
    Click On Browse Qfil
  • As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
  • Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
  1. rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
  2. rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
Click on Load XML
  • Switch off the device and connect it to PC by pressing Volume up & down key.
  • Click on Select Port and choose the port.
    Select Port on qfil
  • Click on Download to start flashing.
    Click Download on qfil
  • Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.


This is the complete guide about how to flash stock firmware Vivo V3 Max using qfil,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting.

Flash Official Firmware On Samsung Galaxy J7+ SM-C710F/DS [Firmware & Tool]

- No comments
Here is an easy way to Install Samsung Galaxy J7+ SM-C710F/DS Stock ROM using ODIN on your Android device. If you have any bootloop or bricked issue on your Samsung Galaxy J7+ SM-C710F/DS, try to fix it by yourself by following this guide.

How To Flash Official Firmware On Samsung Galaxy J7+ SM-C710F/DS

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Samsung logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Samsung Galaxy J7+ SM-C710F/DS is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the Samsung Galaxy J7+ SM-C710F/DS with ODIN software. Just read the instructions carefully to get the best result at your phone flashing.

Pre-Requirements :


  1. Your Samsung Device battery should be greater than 40%
  2. Install the Samsung USB drivers or just install the KIES.
  3. Download the ODIN flashing tool.
  4. Download the Samsung Stock Rom according to your Samsung device model.

Download Official Firmware Samsung Galaxy J7+ SM-C710F/DS

File Name: C710FDXU1AQI4_C710FOLE1AQI4_XID_7.1.1.zip
Country: Indonesia
ROM Version: 7.1.1 Nougat
Build date: 24 Sep 2017
PDA: C710FDXU1AQI4
CSC: C710FOLE1AQI4
Size: 1,7 GB
Password: www.bagifirmware.com
Download Link: Via Google Drive

Samsung Galaxy J7+ SM-C710F/DS Flashtool & Drivers


How To Flash Samsung Galaxy J7+ SM-C710F/DS Stock Rom

Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.
  • The first step is to extract the ODIN flashing tool that you have downloaded and open the odin.exe file as Run as Administrator. 
    Run Odin
  • Turn on your Samsung device into Downloading mode. You can do so by following steps.
    1. Switch off your device
    2. Press the Power key+ Home key + Volume down key Simultaneously until the warning screen appear.
    3. Now press Volume up key to boot into downloading mode.
      Samsung downloading mode
  • Now Connect your device to Computer using the USB cable. When you connect it the ODIN tool detect your device automatically and show a message Added!!. 
    connect samsung to pc
  • Now navigate to Samsung stock ROM that you have downloaded and unzip the package. In the package, there is the number of files available. Just follow the below steps to select files.
    1. click AP/PDA button and select the .tar.md file (compulsory file)
    2. click on CP/Phone button and select the file with MODEM name
    3. click the CSC button and select the file with CSC file name
    4. click the PIT button and select the .pit file.
    Note: If the package contains only one file which is .tar.md file then leave the other steps.

    load firmware file to odin
  • Now its time to start the installation process so to start it just click on Start button. This process will take some time for installing the Stock ROM on your Samsung device.
    star odin
  • After some time ODIN gives a message regarding your process. If ODIN successfully installs the Stock Rom on your device then it will give you SUCCESS message else give you an ERROR message.
    flash samsung success
  • That it guys you have successfully flash your Samsung Android device. Now your mobile automatically restarts and take some time to boot up for the first time.

Note:

If you encounter a Fail! message instead of PASS! message then it might be problem of ODIN version. So remove battery from device and restart it, restart ODIN with different version and repeat the whole process once again. For more detail view you can see the ODIN logs.
Fixing Bootloop After Installing the Firmware

If your phone is stuck in bootloop then boot your device into stock recovery mode and clear “wipe cache partition”. If know more how to fix bootloop then click here.


This is the complete guide about how to flash stock firmware Samsung Galaxy J7+ SM-C710F/DS using Odin,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting.

Flash Stock Rom On Huawei Y3 2017 CRO-U00 (Firmware & Tool)

- No comments
Here is an easy way to Install Huawei Y3 CRO-U00 Stock ROM using SP Flashtool on your Android device. If you have any bootloop or bricked issue on your Huawei Y3 CRO-U00, try to fix it by yourself by following this guide.

How To Flash Stock Rom On Huawei Y3 2017 CRO-U00

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Huawei logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Huawei Y3 CRO-U00 is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the Huawei Y3 CRO-U00 with SP Flashtool software. Just read the instructions carefully to get the best result at your phone flashing.

Huawei Y3 2017 CRO-U00 Firmware Flash Files

File Name: Huawei_Y3_2017_CRO-U00_(C636B125).zip
Rom Version: 6.0 Marshmallow
Size: 1,0 GB
Password: www.bagifirmware.com
Download Link: Via Google Drive

Huawei Y3 2017 CRO-U00 Flashtool & Drivers


How to Install MTK VCOM Drivers:


  1. Open Device manager from My computer. Click on any item & Goto Actions > Add legacy hadware.
  2. Now, Press next & select Install drivers manually.
  3. Press next & click on Have disk.
  4. From the browse option, select the VCOM drivers as per your OS.
  5. Once its done. You will see a screen similar to this:
    Install MTK VCOM Drivers
  6. Once you are done with the Installation part, goto device manager & you’ll find a device similar to this:
    Mtk Vcom Port

How To Flash Huawei Y3 CR0-U00 Stock Rom:


Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

  1. Download Stock Firmware and extract zip or rar file in your PC.
  2. Download and install MediaTek VCom USB drivers. While installing driver avoid using cable for successful installation.
  3. Download and extract Smart Phone (SP) Flash Tool on your PC.
  4. Run the SP Flash Tool.
    Run the SP Flash Tool
  5. Once SP Flash Tool launches, Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted) and load it.
    Click Scatter Loading
  6. Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
    Click Download Button
  7. Switch off your phone and remove the battery (If Removable) and connect it with your PC using a USB cable.
  8. Press and hold the volume UP and Down In case your phone failed to detect.
  9. Wait Until process complete. In end of Successful Flash Stock ROM Firmware, a Green dot / ring will appears.
    Success Flashing


Switch on the phone, Don’t panic If if take a long time, It might take some minutes to starts at first.


This is the complete guide about how to flash stock rom huawei y3 2017 using sp flashtool,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting

Flash Stock Rom On Lenovo A536 [Firmware & Tool]

- No comments
Here is an easy way to Install Lenovo A536 Stock ROM using SP Flashtool on your Android device. If you have any bootloop or bricked issue on your Lenovo A536, try to fix it by yourself by following this guide.

How To Flash Stock Rom On Lenovo A536

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Lenovo logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Lenovo A536 is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the Lenovo A536 with SP Flashtool software. Just read the instructions carefully to get the best result at your phone flashing.

Lenovo A536 Firmware Flash Files

File Name: Lenovo_A536_S155_MT6582_20160201.zip
Size: 1,0 GB
Android Version: 4.4.2 Kitkat
Password: www.bagifirmware.com
Download Link: Via Google Drive

File Name: Lenovo_A536_S186_MT6582_20150813.zip
Size: 1,0 GB
Android Version: 4.4.2 Kitkat
Password: www.bagifirmware.com
Download Link: Via Google Drive

Lenovo A536 Flashtool & Drivers


How to Install MTK VCOM Drivers:


  1. Open Device manager from My computer. Click on any item & Goto Actions > Add legacy hadware.
  2. Now, Press next & select Install drivers manually.
  3. Press next & click on Have disk.
  4. From the browse option, select the VCOM drivers as per your OS.
  5. Once its done. You will see a screen similar to this:
    Install MTK VCOM Drivers
  6. Once you are done with the Installation part, goto device manager & you’ll find a device similar to this:
    Mtk Vcom Port

How To Flash Lenovo A536 Stock Rom:


Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

  1. Download Stock Firmware and extract zip or rar file in your PC.
  2. Download and install MediaTek VCom USB drivers. While installing driver avoid using cable for successful installation.
  3. Download and extract Smart Phone (SP) Flash Tool on your PC.
  4. Run the SP Flash Tool.
    Run the SP Flash Tool
  5. Once SP Flash Tool launches, Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted) and load it.
    Click Scatter Loading
  6. Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
    Click Download Button
  7. Switch off your phone and remove the battery (If Removable) and connect it with your PC using a USB cable.
  8. Press and hold the volume UP and Down In case your phone failed to detect.
  9. Wait Until process complete. In end of Successful Flash Stock ROM Firmware, a Green dot / ring will appears.
    Success Flashing


Switch on the phone, Don’t panic If if take a long time, It might take some minutes to starts at first.


This is the complete guide about how to flash stock rom lenovo a536 using sp flashtool,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting

Flash Stock Rom On Infinix Hot 4 Pro X556 [Firmware & Tool]

- No comments
Here is an easy way to Install Infinix Ho4 4 Pro X556 Stock ROM using SP Flashtool on your Android device. If you have any bootloop or bricked issue on your Infinix Ho4 4 Pro X556, try to fix it by yourself by following this guide.

How To Flash Stock Rom On Infinix Hot 4 Pro X556

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Infinix logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your Infinix Ho4 4 Pro X556 is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the Infinix Ho4 4 Pro X556 with SP Flashtool software. Just read the instructions carefully to get the best result at your phone flashing.

Infinix Hot 4 Pro X556 Firmware Flash Files

File Name: Infinix_Hot4_Pro_X556-H371A1-M-160906V70.zip
Size: 1,4 GB
Android Version: 6.0 Marshmallow
How To Flash: Flash Using Infinix Flashtool
Password: www.bagifirmware.com
Download Link: Via Google Drive

File Name: X556-N-Tcard_update_170517V33.zip
Size: 1,6 GB
Android Version: 7.0 Nougat
How To Flash: Flash Via SDcard (OTA)
Download Link: Via Google Drive

Infinix Hot 4 Pro X556 Flashtool & Drivers


How to Install MTK VCOM Drivers:


  1. Open Device manager from My computer. Click on any item & Goto Actions > Add legacy hadware.
  2. Now, Press next & select Install drivers manually.
  3. Press next & click on Have disk.
  4. From the browse option, select the VCOM drivers as per your OS.
  5. Once its done. You will see a screen similar to this:
    Install MTK VCOM Drivers
  6. Once you are done with the Installation part, goto device manager & you’ll find a device similar to this:
    Mtk Vcom Port

How To Flash Infinix X556 Stock Rom:


Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

  1. Download Stock Firmware and extract zip or rar file in your PC.
  2. Download and install MediaTek VCom USB drivers. While installing driver avoid using cable for successful installation.
  3. Download and extract Smart Phone (SP) Flash Tool on your PC.
  4. Run the SP Flash Tool.
    Run the SP Flash Tool
  5. Once SP Flash Tool launches, Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted) and load it.
    Click Scatter Loading
  6. Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
    Click Download Button
  7. Switch off your phone and remove the battery (If Removable) and connect it with your PC using a USB cable.
  8. Press and hold the volume UP and Down In case your phone failed to detect.
  9. Wait Until process complete. In end of Successful Flash Stock ROM Firmware, a Green dot / ring will appears.
    Success Flashing


Switch on the phone, Don’t panic If if take a long time, It might take some minutes to starts at first.


This is the complete guide about how to flash stock rom infinix x556 using sp flashtool,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting

How To Flash Stock Rom On Lenovo Vibe X2-AP

- No comments
Here is an easy way to Install lenovo Vibe X2-AP Stock ROM using SP Flashtool on your Android device. If you have any bootloop or bricked issue on your lenovo Vibe X2-AP, try to fix it by yourself by following this guide.

How To Flash Stock Rom On Lenovo Vibe X2-AP

Bootloop is a situation where your smartphone starts or booting and then stuck only showing the Lenovo logo only and then return to boot again. It will never stop until you switch off your phone by press and hold the power button for a while. So, if your lenovo Vibe X2-AP is bootloop, your phone will never show the phone menu. And you can't use your phone to make a call or send any text message to someone.

The following guide will show to fix this issue by flash the new firmware to the lenovo Vibe X2-AP with SP Flashtool software. Just read the instructions carefully to get the best result at your phone flashing.

Lenovo Vibe X2-AP Firmware Flash Files

File Name: Lenovo_Vibe_X2-AP_MT6595_S130_150412.zip
Size: 1,4 GB
Android Version: 4.4 Kitkat
Password: www.bagifirmware.com
Download Link: Via Google Drive

File Name: Lenovo_X2-AP_MT6595_S228_151027.zip
Size: 1,25 GB
Android Version: 4.4 Kitkat
Password: www.bagifirmware.com
Download Link: Via Google Drive

Lenovo Vibe X2-AP Flashtool & Drivers


How to Install MTK VCOM Drivers:


  1. Open Device manager from My computer. Click on any item & Goto Actions > Add legacy hadware.
  2. Now, Press next & select Install drivers manually.
  3. Press next & click on Have disk.
  4. From the browse option, select the VCOM drivers as per your OS.
  5. Once its done. You will see a screen similar to this:
    Install MTK VCOM Drivers
  6. Once you are done with the Installation part, goto device manager & you’ll find a device similar to this:
    Mtk Vcom Port

How To Flash Lenovo Vibe X2-AP Stock Rom:


Note: Keep in mind that prior to flash check out the battery time. It should be 20-40% charged. Backup your device data including personal data before flashing or installing firmware on your device.

  1. Download Stock Firmware and extract zip or rar file in your PC.
  2. Download and install MediaTek VCom USB drivers. While installing driver avoid using cable for successful installation.
  3. Download and extract Smart Phone (SP) Flash Tool on your PC.
  4. Run the SP Flash Tool.
    Run the SP Flash Tool
  5. Once SP Flash Tool launches, Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted) and load it.
    Click Scatter Loading
  6. Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
    Click Download Button
  7. Switch off your phone and remove the battery (If Removable) and connect it with your PC using a USB cable.
  8. Press and hold the volume UP and Down In case your phone failed to detect.
  9. Wait Until process complete. In end of Successful Flash Stock ROM Firmware, a Green dot / ring will appears.
    Success Flashing


Switch on the phone, Don’t panic If if take a long time, It might take some minutes to starts at first.


This is the complete guide about how to flash stock rom lenovo vibe x2-ap using sp flashtool,  may be useful for you. if you have questions or you find broken links please ask or leave a comment in the comments field. thanks for visiting