How To Flash Stock Rom Using SP Flashtool

These are the installation instructions to Install Stock Firmware Rom using Smart Phone Flash Tool (SP Flash Tool) on Windows PC.

Before Requirements: Your Android Phone should have at-least 70% of battery to perform the Installation Process.

Step By Step Flash Stock Firmware with SP Flash Tool

  1. Extract all files you downloaded earlier
  2. Download and Install USB drivers on your PC or Laptop.
  3. Download SP Flash Tool above, and install it then run it.

  4. Lenovo Vibe X2-AP Stock ROM Firmware Download [Flash Guide]

  5. Click the "Scatter Loading" and locate the scatter file extract the stock rom / firmware earlier.

  6. Lenovo Vibe X2-AP Stock ROM Firmware Download [Flash Guide]

  7. Assign the firmware which will be in form "Android_scatter.txt".

  8. Lenovo Vibe X2-AP Stock ROM Firmware Download [Flash Guide]

  9. Uncheck Preloader.
  10. Connect your device to your PC or laptop is turned off.
  11. Click Download, and then the flashing process has been running.

  12. Lenovo Vibe X2-AP Stock ROM Firmware Download [Flash Guide]

  13. Make sure the USB driver is properly connected.
  14. Wait flasing process until completed.
  15. When it is finished it will display a Green circle on Flash Tool.

  16. Lenovo Vibe X2-AP Stock ROM Firmware Download [Flash Guide]

  17. Congratulations you have been successful flash stock firmware and returned as factory default.

0 Response to "How To Flash Stock Rom Using SP Flashtool"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel